Fiber Optic
The choice of a resource guide optical fiber
toolkit optical fiber is a broad category, including tools for finishing a variety of jobs in the fiber optics industry. So before you look beyond, please ask yourself: that is what I want to use this guide?
Kits are available for traditional epoxy and polish connector termination, termination connectors rapid fusion splicing, mechanical splicing, cleaning tests of fiber optics, and much more.
'So let s take a look at each type and their functions.
1) Epoxy traditional Polish Connector Termination Tool Kit
This game type is sometimes called universal Toolbox connectorization epoxy. This includes all the tools necessary for the completion of the epoxy, hand polished optical connectors such as CF SC, ST, LC, etc. The following list shows all the essential elements to include.
fiber) coat of pliers to remove the outer sheath title = "Fiber Optic Cables> Fiber Optic Cables
b) fiber separator to remove layers of fiber (900um 250 um tight layer of coating or UV) coating to expose the bare fiber
c) scissors to cut the Kevlar strength member in fiber cladding yellow
d) fiber connector crimping tool for FC, SC, ST, SC
e) The scribe tool fiber at the bare fiber
f) epoxy to fix the fiber inside the connector, empty syringes for dispensing epoxy into the connector
g) plate glass plate so you can place the Polish rubber pad on it
h) rubber polishing pad so that you can place the film rolling on top of it
i) films Pulido (meals included several normally 12um, 3um, 1um and 0.5um)
j) connector polishing by hand washers FC, SC, ST, SC
microscope inspection k) that can inspect the quality of their work
l) Heat oven to harden the resin cured (either 220V or 110V)
m) Various others. cleaning products such as Kimwipes, alcohol isopropyl, etc.
2) completion of Quick Connect Tool Kit
90% of early termination connectors does not require polishing. Have a piece of fiber factory pre-polished inside the connector body, everything you need to do is strip the fiber, clean, joining the fiber and then insert the cleaved fiber into the connector body, with or without assistance in assembling tools, possibly crimp connector with specialized tools.
There is no tool kit universal quick connector termination that each connector is keyed differently by their manufacturers and requires the installation tool of the property. The markings on the market include:
a) 3M Hot Melt connectors
While 3M Hot Melt connectors are classified as early termination, which really needs polishing. The connectors are hot melt epoxy before injecting into the body, simply heat the connector, enter your fiber, you write, let cool, then polish connector. The process is very similar to traditional epoxy polish connectors, but the mixture of epoxy and distribution stages are removed thus reducing the time of cancellation at least 2 minutes. 3M Hot Melt connectors are a popular choice with installers.
b) Corning Unicam Connectors
Corning Unicam Connectors are typical of pre-polishing connectors and mechanical splices. Have a piece of pre-polished fiber inside the connector body, with a corresponding index gel inside too. You just strip, clean and cleave to his fiber, and then insert the cleaved fiber into the connector body, finally Crimp with Unicam together.
They are also very popular with installers of fiber optic and contractors.
c) Tyco / AMP More LightCrimp
More LightCrimp AMP are similar to Corning Unicam. More pre-polishing and mechanical splicing, but designed differently and the corresponding needs more LightCrimp editing tool. They are less popular than Unicam connectors.
d) There are also many new types of connectors for early termination of the AFL, Leviton, Fitel and other manufacturers. Therefore, it is worth keeping an eye on this technology.
3) Toolbox fusion splicing
The second important type of equipment Optical fibers are the cutting and splicing of the fusion of the fiber.
title = "Splicing Fusion Splicing Fusion> is simpler than the fiber termination connector. Therefore require fewer tools, but tools are sometimes very expensive, especially high fiber blades precision. The following list shows the essential elements contained in the range of fusion splicing.
a) The cable jacket stripper fiber to remove the outer cover of optical cables
b) A wire for removing layers of fiber fiber (900um 250um tight coating or coating layer UV) coating to expose the bare fiber
c) scissors to cut the Kevlar strength member in fiber yellow jacket
d) high cut fiber accuracy (which is the most expensive)
e) Fusion splice protection sleeves
f) fiber unit fiber processing waste
g) Other misc. cleaning products such as Kimwipes, isopropyl alcohol, etc.
h) optional visual fault locator to visually check the quality of its junction
4) optic cleaning kit
cleaning kit of optical fibers is rather simple tool, because it does not include tools, but only products cleaning. Most include:
a) Retain the air (optical quality)
b) 2.5 mm foam rods for cleaning FC, SC, ST connectors, couplers and adapters
C) 1.25 foam pads to clean the LC and MU connectors, couplers and adapters
d) lint free Kimwipes
e) swabs alcohol before foamed
f) cleaning the fiber coil connector FC, SC, ST, LC, MTRJ, etc.
g isopropyl alcohol)
Tool kits generally include cleaning alcohol, in most cases, he moved to land.
5) Test Kit optical fiber
Fiber-based tests usually only involves title = "Loss Insert"> insert loss of evidence, VFL and measure the return loss option.
You can buy test kit with fiber or without fiber stripping and cleaving tools. The essential elements are in fact the light source, power meter and visual fault locator option. You can always obtain separation of the fibers, cable cover mining, tools and equipment may have, as a connector termination tool kit universal epoxy.
The fiber optic patch cables, power adapters meter shall also be included in the kit to facilitate the testing of different connectors, such as FC, SC, ST, LC, MU, etc.
About the Author
Exfiber Optical Technologies Co.,Ltd.
http://www.exfiber.com/
Address: Zhongmin Building, No.8 Guodongyuan Rd, Hangzhou, China
Email: sales@exfiber.com
I have fiber optic connection between my blu ray and my surround speakers but can not get back to work?
I connected my player Blu-ray surround sound system my system with a fiber optic cable. The sound comes from the vast majority of my speakers – but the rear speakers have no sound. Help? I have a Samsung DVR / surround sound system connected to a Samsung Blu-ray.
You should check the settings menu Audio Blu-ray.
HOMEMADE OPTICAL FIBER FIBRE OPTIC LIGHTING CABLE DIY Do it yourself Fiber Optic Cable Optical Fibre
